24 CFR §200.937 — Supplementary specific procedural requirements under HUD building product standards and certification program for plastic bathtub units, plastic shower receptors and stalls, plastic lavatories, plastic water closet bowls and tanks

fha-24cfr-200-937

24 CFR §200.937, Supplementary specific procedural requirements under HUD building product standards and certification program for plastic bathtub units, plastic shower receptors and stalls, plastic lavatories, plastic water closet bowls and tanks. An FHA program rule in Subpart S—Minimum Property Standards of 24 CFR Part 200 (Introduction to FHA Programs).

This register: .xlsx .csv

Verbatim regulatory text (3)

Verbatim provisions from 24 CFR §200.937 — Supplementary specific procedural requirements under HUD building product standards and certification program for plastic bathtub units, plastic shower receptors and stalls, plastic lavatories, plastic water closet bowls and tanks — each quote is a verified substring of the regulator-published source snapshot, not retyped. Quoted for reference; this is not legal advice. The operational layer (P&P updates, prompts) lives in the regulation update kits.

24 CFR §200.937(a)

(a) Applicable standards. (1) Plastic bathtub units, plastic shower receptors and stalls, plastic lavatories, and plastic water closet bowls and tanks shall be designed, assembled and tested in compliance with the following standards, which are incorporated by reference: ANSI Z124.1—(1980) Plastic Bathtub Units ANSI Z124.2—(1980) Plastic Shower Receptors and Stalls ANSI Z124.3—(1980) Plastic Lavatories ANSI Z124.4—(1983) Plastic Water Closet Bowls and Tanks (2) These standards have been approved by the Director of the Federal Register for incorporation by reference. They are available from the American National Standards Institute, Inc., 11 West 42nd Street, New York, NY 10036. The standards are also available for inspection at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html.

Source: 24 CFR §200.937(a) · source URL · snapshot 874da589eb622c83

24 CFR §200.937(b)

(b) Labeling. (1) Under the procedures set forth in paragraph (d)(6) of § 200.935, concerning labeling of a product, the administrator's validation mark and the manufacturer's certification of compliance with the applicable standards are required to be on the certification label issued by the administrator to the manufacturer. In the case of plastic bathtub units, plastic shower receptors and stalls, plastic lavatories, and plastic water closet bowls and tanks, the following additional information shall be included on the certification label: (i) Manufacturer's statement of conformance to UM 73a; (ii) Manufacturer's name and code identifying the plant location. (2) The certification label shall be affixed to each plastic bathroom fixture.

Source: 24 CFR §200.937(b) · source URL · snapshot 874da589eb622c83

24 CFR §200.937(c)

(c) Periodic tests and quality control inspections. Under the procedures set forth in paragraph (d)(8) of § 200.935, concerning periodic tests and quality control inspections, the frequency of testing for a product shall be described in the specific building product certification program. In the case of plastic bathroom fixtures, testing and inspection shall be conducted as follows: (1) At least every six months, the administrator shall visit the manufacturer's facility to select a sample of each certified plastic bathtub unit, plastic shower receptor and stall, plastic water closet bowl and tank for testing in an approved laboratory, in accordance with applicable standards. (2) At least every twelve months, the administrator shall visit the manufacturer's facility to select a sample of each certified plastic lavatory for testing in accordance with applicable standards. (3) The administrator shall also review quality control procedures at each visit to determine that they continue to be followed.

Source: 24 CFR §200.937(c) · source URL · snapshot 874da589eb622c83

Get this regulation in your AI window

Put the verbatim text and its effective date in front of your assistant, instead of whatever it remembers.

Add to Claude Add to ChatGPT

Add to Claude shows the one-time setup: paste one address, no account with us. Add to ChatGPT adds the free C4C app from ChatGPT’s app directory. Either way it’s free.

Get notified if this rule changes

One email when 24 CFR §200.937 — Supplementary specific procedural requirements under HUD building product standards and certification program for plastic bathtub units, plastic shower receptors and stalls, plastic lavatories, plastic water closet bowls and tanks changes: what changed, the new verbatim text, and the effective date. Nothing else.

Double opt-in: we send a confirmation link first. Following one section does not subscribe you to anything else. Privacy.

Source of record: https://claudeforcompliance.com/regs/fha-24cfr-200-937/ · register fha-24cfr-200-937 · verbatim, source-snapshotted regulator text from the Claude for Compliance corpus. To work from every register at once, download the corpus and follow the methodology.