24 CFR §200.948 — Building product standards and certification program for carpet cushion
24 CFR §200.948, Building product standards and certification program for carpet cushion. An FHA program rule in Subpart S—Minimum Property Standards of 24 CFR Part 200 (Introduction to FHA Programs).
Verbatim regulatory text
Verbatim provisions from 24 CFR §200.948 — Building product standards and certification program for carpet cushion — each quote is a verified substring of the regulator-published source snapshot, not retyped. Quoted for reference; this is not legal advice. The operational layer (P&P updates, prompts) lives in the regulation update kits.
24 CFR §200.948(a)
(a) Applicable standards. (1) All carpet cushion shall be designed, manufactured, and tested in compliance with the following standards from the American Society for Testing and Materials: (i) ASTM D 1667-76—(Reapproved 1990) Standard Specification for Flexible Cellular Materials—Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam); (ii) ASTM D2646-87—Standard Test Methods for Backing Fabrics; (iii) ASTM D629-88—Standard Test Methods for Quantitative Analysis of Textiles; (iv) ASTM D3574-91—Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams; (v) ASTM D3676-78—Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay. (2) These standards have been approved by the Director of the Federal Register for incorporation by reference. The standards are available from the American Society for Testing Materials, 1916 Race Street, Philadelphia, PA 19103. These standards are also available for inspection at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html.
24 CFR §200.948(b)
(b) Labeling. Under the procedures set forth in § 200.935(d)(6) concerning labeling of a product, the administrator's validation mark, the manufacturer's certification of compliance with the applicable standards, and the type and class all are required to be on the certification label issued by the administrator to the manufacturer.
24 CFR §200.948(c)
(c) Periodic tests and quality assurance inspection. Under the procedure set forth in § 200.935(d)(8), testing and inspection shall be conducted as follows: (1) At least every six months, the administrator shall visit the manufacturer's facility to select a sample of each certified carpet cushion for testing by a laboratory approved by the administrator. (2) The administrator also shall review the quality assurance procedures every six months to assure that they are being followed by the manufacturer.
Get this regulation in your AI window
Put the verbatim text and its effective date in front of your assistant, instead of whatever it remembers.
Add to Claude shows the one-time setup: paste one address, no account with us. Add to ChatGPT adds the free C4C app from ChatGPT’s app directory. Either way it’s free.
Get notified if this rule changes
One email when 24 CFR §200.948 — Building product standards and certification program for carpet cushion changes: what changed, the new verbatim text, and the effective date. Nothing else.
Double opt-in: we send a confirmation link first. Following one section does not subscribe you to anything else. Privacy.
Source of record: https://claudeforcompliance.com/regs/fha-24cfr-200-948/
· register fha-24cfr-200-948 · verbatim, source-snapshotted regulator text from the
Claude for Compliance corpus. To work from every register at once, download the corpus
and follow the methodology.